20230104 Enclosure

 Interactive link here
at
Labels: , ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

20230508 Tuning In the O-Ring Size

  Parker handbook  4.3 Face Type Seals “Face type seals are sometimes rectangular. In designing such a seal to receive a standard O-ring, th...

  • 20230510 Brainstorming quick release
    Quick release  Clip + pin, when gripper closes, clip gets pushed back, gripper drops Straight snap pin: Kinda short, not sure if pla will be...
  • Dual Firing the Torpedo: Ideas
      Dual Firing the torpedo Connect to one axle, out of phase by 90 degrees Potentially change this linkage to a CAM (would require spring to ...
  • 9/6/22 Work Holding For Rails
    Colin Szeto Printed out in ABS a 3 part work holding Jig with the holes printed into the top and sides. Enables meeting the desired toleranc...