20230118 Laying Out Electronics Plates
Laying out the plates used for the electronics harness we can see all of the parts can fit on a 24 by 24 in sheet.
Showing posts with label Electronic Harness. Show all posts
Showing posts with label Electronic Harness. Show all posts
20231301 Placement of the Electronics Harness
20231301 Placement of the Electronics Harness
Placement of the electronics harness reference diagram here
objective , place the hydrophone boards as far away from the PDB (power distribution board) as possible.
Problem is that the hydrophones is about 6.8 inches in an 8 in enclosure
This is the volume of placement where the hydrophone boards can be placed
Subscribe to:
Posts (Atom)
20230508 Tuning In the O-Ring Size
Parker handbook 4.3 Face Type Seals “Face type seals are sometimes rectangular. In designing such a seal to receive a standard O-ring, th...
-
20230103 Second Version of Camera Enclosure Using sealing m4 screws to mount oak-d onto back here Thinking about a male usb-c breakout board...
-
Dual Firing the torpedo Connect to one axle, out of phase by 90 degrees Potentially change this linkage to a CAM (would require spring to ...
-
Colin Szeto Objective was to verify the feasibility of the assembly and dimensions of the motor guard around the physical motor before laser...
